Home Furnishings Guide
Featured Home Furnishings Article
For a permanent link to this article, or to bookmark it for further reading, click here.
How to reupholster furniture
from: SelfHomeImprovement.comIf your old furniture is looking even older, you can consider of changing or remodeled it in a new way. Good brand of new upholstery will definitely change its look. You can also have the chance of showing your creativity in some of the cases. Any type of furniture can be upholstered if it is covered by any type of fabric. You can also do it by your own and in the process you are going to save time by not ordering to someone else. You can also choose the fabric and cushion according to your own choice.
The first work is to choose a good upholstery quality fabric. Try to avoid choosing a regular fabric as they are not so durable. You will also get the stain resistant upholstery fabrics which are really easy to maintain. You don't need to worry about any tea or coffee spill as these are re-washable. While choosing upholstery, see that it is matching with other furniture in the room. It is advisable not to take any stiffer and thicker upholstery as the re-upholstery process could be tough. The amateur upholsters should not try with suede and leather as well. There are many stores available where from you can get a wide choice at low prices.
Some of the tools are very important to reupholster furniture and these are needle or nose pliers, rubber mallet, welting, staple gun, Sharp scissors, cotton batting and glue gun. Cotton batting is usually used to make the sitting arrangement comfortable. You can also take the help of any friend as sometimes it becomes tough to arrange the whole thing on your own.
Chair cushion reupholstering is perfect for the amateur in this field. You can practice on some of your cushions before starting reupholster something else. First you have to unscrew the cushion of the seat from the frame of the chair. Then the staples should be removed. Next step followed by removing the fabric. If it is looking worn out, you can also change the old batting.
Some of the chairs are made with one piece of wood. Such piece can be taken and placed on the top of the new fabric. The fabric should be cut around the wooden piece with the pair of scissors. You can keep two to three inches extra on each side. Replace the whole stuff with batting. The seat board should be placed on the top of it. Staple gun can be used to staple the batting. Excess batting should be trimmed off.
The piece of wood should be placed over the fabric. It should be stapled on four sides with special neatness to the corners. The excess fabric should be trimmed and your new seat is ready.
96 Ford Upholstery News